How to Identify Your 64 Audio IEM Cable Type

By 64 Audio - In-Ear Monitors | Published: 2026-10-18

Category: How-to Guides

Learn to identify 64 Audio IEM cable types by connector shape, pin count, and cable construction. This guide covers IPX, 2-pin, and other common connectors.

Quick Answer

Look at the connector that plugs into your IEM. 64 Audio uses two main types: the proprietary IPX connector (a flat, rectangular, four-pin design) and the standard 2-pin connector (two small round pins on a flat base). The cable's construction—braided vs. flat, and the number of braids—also helps identify the model.

Why Cable Identification Matters

Using the wrong cable can damage your IEM's connector port or cause intermittent audio. 64 Audio offers cables with different connectors, impedances, and materials, each affecting sound and durability. Knowing your cable type ensures you buy the right replacement or upgrade.

Common 64 Audio Cable Connectors

The IPX connector is a proprietary design with a flat, rectangular shape and four pins inside. It's used on many 64 Audio universal and custom IEMs. The 2-pin connector (0.78mm spacing) is a standard in the industry, found on some 64 Audio models and aftermarket cables. The cable's connector type is usually marked near the plug or on the packaging.

Step-by-Step Identification

Check the Connector Shape: Remove the cable from your IEM and look at the plug that goes into the earpiece. An IPX connector is flat, rectangular, and has four small pins. A 2-pin connector has two round pins protruding from a flat base. Common mistake: Confusing a recessed 2-pin connector with an IPX. If you see two pins, it's 2-pin—even if the base is flat.
Examine the Cable Construction: Look at the cable's braiding and thickness. A single-braid or flat cable is often a standard or budget option. Multi-braid cables (e.g., eight-braid) indicate higher-end construction with lower impedance. Checkpoint: Count the braids. More braids usually mean lower resistance and better durability, but also higher cost.
Inspect the Jack Plug: Look at the plug that goes into your audio source. A 3.5mm single-ended plug is standard. A 4.4mm balanced plug has a larger diameter and four contact points. Some cables have a 90-degree angled plug for better strain relief. Common mistake: Assuming a 4.4mm plug works with any balanced output—verify your source's output type first.
Read the Cable Markings: Many 64 Audio cables have the brand name and model printed on the Y-split or near the plug. Look for text like 'IPX' or '2-Pin' to confirm the connector type. Checkpoint: If markings are worn, use the connector shape as your primary identifier.

Cable Examples

IPX Professional Cable 48": The IPX Professional Cable 48" features a flexible, silver-plated oxygen-free copper construction with lower resistance than tinsel and most litz cables. It uses angled water-resistant estron T2™ connectors and a branded 90-degree angled 3.5mm jack. If your IEM uses the IPX connector, this cable offers a durable, low-resistance upgrade with a flexible feel and water-resistant connectors—ideal for daily use or stage monitoring.
Black Eight-Braid Cable: The Black Eight-Braid Cable is a 23 x 25 AWG silver-plated copper construction built into eight braids, with a low 0.26Ω impedance rating. It's available with 3.5mm single-ended or balanced 4.4mm connectors and uses classic angled 2-pin connectors. For IEMs with a 2-pin connector, this eight-braid cable provides a very low impedance path and a choice of termination, making it suitable for high-end listening or balanced setups.