Add Custom Color to Your 64 Audio IEMs

By 64 Audio - In-Ear Monitors | Published: 2026-10-26

Category: How-to Guides

Personalize your in-ear monitors with the 64 Audio Colors Sticker Pack. Follow these steps to apply stickers without bubbles and make your IEMs stand out.

Quick answer

Use the 64 Audio Colors Sticker Pack to add custom color accents to your IEMs. Each pack includes circle and rectangle stickers in your chosen color plus black and white versions, giving you flexible design options.

Why use stickers instead of paint or skins

Stickers let you experiment with color without permanent commitment. Unlike paint or full skins, they peel off cleanly and don't risk damaging the IEM shell or affecting acoustic performance. The 64 Audio Colors Sticker Pack uses a thin vinyl material that conforms to curved surfaces without adding noticeable bulk.

Choosing the right color for your IEMs

The sticker pack offers individual color options and a Multicolor Pack with every variation. For a subtle accent, match the sticker to your IEM's existing color scheme. For high contrast, pick a complementary color from the opposite side of the color wheel. The black and white stickers included in each pack work well as neutral accents or as a base layer for layering colors.

Step-by-step application guide

Clean the IEM surface: Wipe the area where you'll place the sticker with a microfiber cloth or isopropyl alcohol wipe. Remove all oils, dust, and residue. Let the surface dry completely. Skipping this step is the most common cause of stickers peeling off early.
Peel the sticker from its backing: Use tweezers or clean fingernails to lift the edge of the sticker. Avoid touching the adhesive side with your fingers, as skin oils reduce adhesion. If the sticker curls, let it sit flat for a minute before applying.
Position the sticker without pressing down: Hold the sticker above the IEM and align it with your desired placement. Once it touches the surface, it's harder to move, so take your time. Use the rectangle sticker along the faceplate edge and the circle sticker on the shell's flat area for best fit.
Press from center outward: Starting from the middle, use a soft cloth or your fingertip to press the sticker flat, working toward the edges. This pushes air bubbles outward. If a bubble remains, lift the nearest edge slightly and re-press. Do not poke holes in the sticker.
Let the adhesive set: Wait at least 30 minutes before handling the IEMs normally. For best results, avoid moisture or heat exposure for 24 hours. The adhesive reaches full strength after a day, so don't test the bond immediately.

Product details

64 Brand Colors Sticker Pack: Each color pack comes with circle + rectangle stickers in the selected color as well as a circle + rectangle sticker in black and in white. Six stickers total. The Multicolor Pack comes with every color variation, 14 stickers total. You get multiple placement options per color, plus neutral tones for contrast, without buying separate packs.
64 Brand Colors Sticker Pack