How to Attach a VAC Pro to Your 64 Audio IEMs

Quick answer

Attach the VAC Pro to your 64 Audio IEMs by clipping it onto the cable near the Y-split, then routing the microphone or cable tie as needed.

Step-by-step guide

1. Identify the attachment point: Locate the Y-split on your IEM cable. The VAC Pro clips onto the cable just above the split, where the left and right channels separate. Make sure the clip is oriented so the microphone (if present) faces your mouth.
2. Open the clip and slide it onto the cable: Gently squeeze the sides of the VAC Pro clip to open it, then slide it over the cable at the identified point. Do not force it; if it does not slide easily, adjust the angle. Avoid pinching the cable insulation—this can damage the wire over time.
3. Secure the cable in the channel: Press the cable into the built-in channel on the VAC Pro until it snaps into place. Ensure the cable lies flat and is not twisted. A twisted cable can cause uneven tension and affect microphone performance.
4. Route the microphone or cable tie: If your VAC Pro includes a microphone, position it near your collar. For cable-only use, use the integrated tie to bundle excess cable length. Test the microphone position by speaking at a normal volume—adjust if the audio sounds muffled.
5. Test the connection: Plug your IEMs into your audio source and play a track. Gently move the cable to ensure the VAC Pro stays in place and does not cause static or signal loss. If you hear crackling, re-seat the clip or check for cable damage near the attachment point.

Product facts

• VAC Pro: The VAC Pro is a maintenance-tools accessory available in a Standard option (SKU 2600-5062). It is designed specifically for cable management and microphone integration with 64 Audio IEMs.