What the U4s record confirms before you start
The U4s is a quad driver hybrid universal in-ear monitor that uses patented technologies originally developed for 64 Audio's flagship models. That description tells you what kind of earphone you are setting up, but it does not include a cable pinout, ear tip sizes, nozzle dimensions or a step-by-step first-use procedure. The practical setup below therefore sticks to checks you can make yourself and avoids inventing manufacturer instructions.
The shell and faceplate have illuminant properties that change tone under different lighting, and the Slate Blue finish is inspired by blue-dial timepieces. Those details matter for care and appearance, not for fit, so treat them as context rather than setup steps.
U4s catalog facts that shape your setup
- U4s: Quad driver hybrid UIEM with patented technologies originally developed for 64 Audio flagship products. Confirms the model and driver type so you know you are setting up the intended earphone.

U4s - U4s: Slate Blue shell with a faceplate pattern inspired by Muonionalusta meteorite fragments; both faceplate and shell have illuminant properties. The finish is a visual feature, not a fit or connection specification, so do not use appearance as a proxy for compatibility.
A first-session setup routine for the U4s
Work through these checks in order. Stop and ask 64 Audio support if any step does not behave as expected rather than forcing a connection.
- Inspect the cable and connectors: Look over the cable ends and the U4s sockets for debris or damage before connecting. The supplied record does not specify the connector type, so match the cable to the earphone by physical fit rather than assuming a standard.
- Seat the cable without force: Push each connector straight into its socket until it seats. If it resists, withdraw it and check alignment. Do not twist or lever the connector, because the catalog does not confirm a locking mechanism or a recommended insertion force.
- Fit the ear tips before judging sound: Start with the tip size that seals comfortably in each ear. A poor seal changes what you hear, so settle fit first and evaluate the U4s afterward.
- Check left and right orientation: Confirm each earpiece is in the correct ear before listening. The catalog does not describe markings, so use the physical shape and cable routing to identify sides.
- Set a conservative listening level: Begin at a low volume and raise it gradually. The supplied record does not include sensitivity or impedance figures, so there is no catalog basis for a specific source setting.
Ear tip selection: what you can and cannot decide from the record
The U4s record does not list included ear tip sizes, nozzle diameter or compatible tip models. That means tip selection has to be based on what you can observe and feel, not on a catalog chart.
- Seal first: Choose the tip that gives a stable, comfortable seal without deep pressure. If sound seems thin or distant, revisit the seal before changing anything else.
- Comfort over time: Wear the U4s for a short session and check for hot spots. A tip that feels fine for a minute may not feel fine for an hour.
- Do not assume a tip model fits: Because the catalog does not confirm nozzle dimensions, test any third-party tip carefully and do not force it onto the U4s.
- Keep a simple record: Note which tip size works in each ear so you can repeat the fit after cleaning or travel.
Cable connection checks and honest limits
The U4s catalog record does not confirm the connector standard, cable length, termination or whether a replacement cable is included. Treat cable questions as things to verify with 64 Audio rather than assumptions.
- Match connector to socket: Use only a cable whose connector physically matches the U4s socket. The record does not name the interface, so do not rely on a generic IEM cable assumption.
- Avoid hot-plugging: Connect or disconnect the cable with the source turned down or off to reduce the chance of an audible pop.
- Check strain relief: Route the cable so the connector is not bent sharply at the socket. The catalog does not specify a bend radius, so use gentle routing as a precaution.
- Confirm before buying an upgrade cable: Ask 64 Audio to confirm the connector type and wiring before purchasing a third-party cable, because the supplied record does not provide those details.
First-use tips that stay within the evidence
Keep the first sessions short and check comfort in both ears. The U4s has illuminant shell and faceplate properties, so store it away from prolonged direct sun if you want to preserve the finish, though the catalog does not give a specific care procedure.
If one channel sounds different from the other, reseat the cable and the ear tip before assuming a fault. If the difference remains, contact 64 Audio support; the supplied record does not include troubleshooting steps or warranty terms, so do not rely on this article for either.

