Start with the earphones the case is made for
The Black Leather Case is not a universal pouch. The catalog states it is made to fit A-Series custom-fit and U-Series universal-fit earphones. If your IEMs fall outside those two families, the supplied information does not confirm a fit, so treat that as a decision limit rather than a guarantee.
That model-specific fit is the first checkpoint before packing. Confirm your earphones are an A-Series custom or U-Series universal model, then use the case as intended.
What the catalog confirms about the case
- Black Leather Case: Made to fit A-Series custom-fit and U-Series universal-fit earphones, with enough room for extra ear tips or a cable adaptor. This is the compatibility statement to check before you buy or pack. It also tells you the case is sized for small accessories, not just the earphones.

Black Leather Case - Black Leather Case: Exterior dimensions: 3.5" W x 1.75" H. These are the only supplied measurements. Use them as the catalog's stated exterior size, not as a guarantee of internal clearance for every accessory combination.
- Black Leather Case: Exterior is high-quality simulation leather; interior is lined with soft felt. The felt lining is the reason the case is described as keeping earphones comfortable and scratch free, which shapes how you load it.
How to pack the case without forcing anything
The catalog gives you the intended contents and the materials, not a step-by-step manufacturer procedure. The sequence below follows from those facts and keeps pressure off the shells and cable.
- Check the model fit first: Confirm your earphones are A-Series custom-fit or U-Series universal-fit. If they are not, the supplied information does not confirm this case is made for them.
- Decide what travels with the earphones: The catalog allows room for extra ear tips or a cable adaptor. Choose one small accessory set rather than filling every gap.
- Place the earphones against the felt lining: The soft felt lining is there to help keep earphones comfortable and scratch free. Let the shells rest on it rather than pressing them against the case walls.
- Add the small accessory beside, not on top: Keep extra ear tips or the cable adaptor next to the earphones so the lid closes without pressing the shells.
- Close only if the lid meets without resistance: The catalog does not specify a compression limit or a maximum load. If the case feels overfull, remove an accessory rather than forcing the closure.
Leather case care that the catalog actually supports
The record describes the exterior as simulation leather and the interior as soft felt. It does not supply cleaning agents, conditioning instructions or water-resistance claims, so keep care conservative.
- Keep the felt lining dry and debris-free: The felt is the scratch-protection layer. The catalog does not confirm that the case is water-resistant, so avoid letting moisture sit against the lining.
- Wipe the simulation leather exterior gently: No cleaner or conditioner is specified in the supplied information. Use a soft, dry approach and avoid abrasive materials that could dull the finish.
- Store only what the case is made for: The case is made for A-Series and U-Series earphones plus small extras. Overloading it with unrelated gear is not supported by the catalog.
- Treat the embossed logo and stitching as finish details: The 64 Audio logo is embossed and the case is finished with black stitching. The catalog gives no repair guidance for either, so avoid pulling at stitching or scuffing the logo.
What the size guide can and cannot tell you
The catalog supplies exterior dimensions only. That is enough to compare the case's footprint with your bag or drawer, but not enough to promise internal clearance for every ear tip or adaptor combination.
- What you can rely on: The stated exterior size of 3.5" W x 1.75" H, the A-Series and U-Series fit statement, and the allowance for extra ear tips or a cable adaptor.
- What the catalog does not confirm: Internal dimensions, a maximum load, water resistance, drop protection ratings and cleaning products are not supplied. Do not treat the case as proof of those properties.
- How to use the gap in information: Pack conservatively, test the closure without force, and keep the load to the earphones plus one small accessory set.
A realistic packing routine for travel
For daily carrying or travel, the safest routine is the one the catalog supports: confirm the earphone family, place the earphones on the felt lining, add only the extra ear tips or cable adaptor you need, and close the case only when it closes freely. The Black Leather Case is a carrying option for A-Series and U-Series earphones, not a general-purpose hard case, and the supplied information does not describe crush resistance or weather sealing.
If you are storing custom IEMs safely over longer periods, the same limits apply. Keep the case dry, avoid compressing the contents, and do not assume the simulation leather exterior provides protection the catalog has not stated.

