How to Attach a Shirt Clip to Your IEM Cable
By 64 Audio - In-Ear Monitors | Published: 2026-10-21
Category: How-to Guides
Learn how to securely attach a shirt clip to your IEM cable for better cable management on stage or during daily use. Follow these simple steps.
Quick Answer
Slide the shirt clip onto your IEM cable above the Y-split, position it near your collar, and snap it onto your shirt or strap. This prevents cable snags and keeps your gear secure.
Why Use a Shirt Clip for IEM Cable Management
A shirt clip holds your IEM cable in place so it doesn't swing or catch on equipment during a performance or commute. It also reduces microphonics—the noise transmitted through the cable when it rubs against clothing.
For stage use, the clip keeps the cable path predictable and out of your way. For everyday listening, it prevents the cable from pulling on your IEMs when you move your head.
Choosing the Right Clip for Your Cable
Most IEM cables are thin and flexible, so a clip designed for thicker headphone cables may not grip securely. The 64 Audio Shirt Clip 5-Pack includes five clips made for standard IEM cable diameters, giving you spares if one wears out or you need a backup.
If your cable has a memory wire or a thick jacket, test the fit before relying on the clip during a performance. A loose clip can slide off when you move.
How to Attach a Shirt Clip to Your IEM Cable
- Step 1: Identify the cable section above the Y-split: Locate the single cable segment that runs from the Y-split to your audio source (phone, DAP, or wireless receiver). This is the best spot for the clip because it keeps the weight balanced and doesn't interfere with the earhook or memory wire. Do not attach the clip below the Y-split—it will pull on one ear and create an uneven cable path.
- Step 2: Open the clip and slide it onto the cable: Gently squeeze the clip to open its jaws. Slide the cable into the groove until it sits snugly against the clip's inner channel. The clip should grip the cable without pinching or deforming it. If the clip feels too tight, do not force it—you risk damaging the cable jacket. Try a different clip or check if your cable has an unusually thick coating.
- Step 3: Position the clip near your collar or strap: With your IEMs in place, move the clip up or down the cable until it rests at a point where the cable hangs naturally toward your collar. For stage use, clip it to your shirt, lapel, or guitar strap. For everyday use, clip it to your collar or bag strap. Avoid clipping to a thick seam or pocket flap—the clip may not hold securely and could pop off when you move.
- Step 4: Snap the clip onto your clothing: Press the clip firmly onto the fabric until you feel it latch. Give the cable a gentle tug to confirm the clip is secure. If it slides, reposition it on a thinner or smoother part of your clothing. Do not rely on the clip alone to support the full weight of a heavy cable or source—it is designed to manage the cable, not carry the device.
Product Information
- Shirt Clip 5-Pack: The 64 Audio Shirt Clip 5-Pack contains five clips designed for standard IEM cables. Having multiple clips lets you keep one on each cable or replace a lost clip without ordering a single replacement.
Shirt Clip 5-Pack
